Tanks, prime skins
Sat, Nov 15th 2008
Today was a pretty good day! I pressure tested the tanks, and with the exception of two tiny leaks at the top outter edge of one of the baffles, the ballons, schrader valve, and the plug in the ER tanks bung (to be sealed later), they came out leak free! The only two leaks that we actually a concern (the baffle) seemed to seal themselves up, but I put some more proseal on there just to be sure. Then I hung the top skins and shot them with primer, and later, clearcoat.
Drawing: 10A, 12
Hours: 3.32