HS front spar

Fri, Oct 19th 2007


Today I started with the front spar for the horizontal stabilizer. First, I clecoed the HS-710 and HS-714 to the HS-702's. This was followed by match drilling the appropriate holes through the 702, 710, and 714. Next, I marked the corners of HS-710 and HS-714 that needed to be removed and decided that I wanted to buy a belt sander before I tacked that job, so I wrapped it up for the night.

Drawing: 3
Hours: 0.5

Entry Image: 1193708423

Entry Image: 1193708423
Entry Image: 1193708453