F-719 longerons

Wed, Dec 29th 2010


Today I made the next set of longerons. They required fabbing the F-719B angle clips and bending the end of the F-719-L&R to overlap the the F-704 bulkhead more smoothly. When these tasks were done, I drilled the longerons to the F-770 skins. The rudder pedal mounting blocks will be bolted to the top of the F-719 longerons. The last thing I did was cut the F-717 lower longerons out of 1" x 1.25" angle and did the required trimming.

Drawing: 23
Hours: 4

Entry Image: 1294544707

Entry Image: 1294544492
Entry Image: 1294544707
Entry Image: 1294544755