Fitting right wingtip

Sat, Feb 13th 2010


Started today by cutting down the bottom side of the fiberglass wingtip, taping it into position, and locating the hinge rivet holes. Then I drilled the holes through the fiberglass and the hinge, removed the wingtip and hinge section, and deburred the hinge and riveted it to the wingtip. Then I trimmed up the top side of the wingtip and riveted the hinge section to the wing and bolted the ER tank to the end rib.

Drawing:
Hours: 4.5

Entry Image: 1266378962

Entry Image: 1266378924
Entry Image: 1266378962