Pitot plumbing and wiring
Mon, Jan 11th 2010
I broke out the tap today so I could mount the AOA/pitot tube with screws. Tapped the holes and cut the aluminum tubes to what I thought would be a good length, installed the fittings, mounted the tube to the mast and started running some wires for power to the pitot heat and the fuel transfer pump. I also broke out some proseal to keep the plastic AOA/pitot lines away from the aileron belcrank. I don't think they would have been a problem, but a little goo will ensure they aren't.
Drawing:
Hours: 2.5